Free call: 1800 818 448

HMV GM 07 Series Thread Cutting Machines

  • HMV GM 07 Series Thread Cutting Machines

    HMV GM 07 Series Thread Cutting Machines Jbl001

    On The Thread Cutting Edge

    The GM 70-50 M Thead cutting machine succeeds the popular OK 3. Designed to cut threads in 8 to 50mm diameter stock the machine features seamless variable spindle speeds of 20~350rpm suited to cutting threads in modern materials. HMV machines are made to high standards in Sweden.

    The design of the GM 07-50 M enables higher production capacity, higher quality threads, better safety and ergonomics than HMV’s former machines.

    The machine is especially suited for suited for moderate production demands, short and mid-length production runs and mobile operations.

    For higher or continuous production runs or threading of rack-type cutters the GM 07-50 A is recommended which can be equipped to operate automatically.

    Features include:

    The Symmetric Clamp which fastens materials of 8~50mm or 16~100mm in diameter depending on the choice of die head and clamps with a force of up to 4 tons.

    Material is fastened mechanically by hand wheel and screw with the option of hydraulics on the GM 07-50 H and GM 070-100H models.

    Die Head type GH-3 for pitch diameter 8~50mm and the GH-5 for 16-100(115)mm can be equipped with die holders for either right or left hand threads. The same die holder is used for for all thread dies within respective diameter interval.

    The dies can be rapidly and accurately adjusted in their holders with a special setting template while the required thread size can be set, conveniently by referring to the thread scale on the die head. Heavy metric, Witworth and UNC threads can all be read from the scale on the die head. A short test cut is always recommended to determine any adjustments before a production run.

    Thread Dies. The manufacturer keeps a full range of thread dies in stock. The dies are manufactured from high speed steel to give high cutting speeds, excellent thread cutting and extended tool life.

    Specially coated and tempered thread dies are available as an option. the coating reduced unwanted dirt on the dies resulting in higher quality threads in many materials and also enables higher cutter speeds. Thread cutting dies are easily sharpened by grinding the end surface of the cutters.

    Hydraulic Version. The GM 07-50 H is identical to the M model with the exception of the hydraulic clamp and die head.

    The following equipment and Accessories are avaiable for the HMV 07 Series:

    • Grinding fixture for dies
    • Standard thread dies (Metric, Withworth and UNC)
    • Coating of thread dies (for better threading performance and extended life span)
    • Special thread dies can be manufactured to custom specifications
    • Roll slides for chip container
    • SV 07 chip box trolley
    • SL 07 extra chip container
    • Adjustable material stand for long rods
    • Machine lighting (used when adjusting thread dies and diameter)
    Description GM 07-50 GM 07-100
    Spindle motor, kW 5.5 11
    Max torque at spindle, Nm 500 1000
    Thread cutting range, mm 8-50 16-100 (option 115)
    Spindle variable speed, rpm 20-350 20-350
    Cutting speed, standard, m/min
    - steel Rm350N/mm²
    up to 15 up to 15
    Cutting speed, coated dies, m/min
    - steel Rm350N/mm²
    up to 20(25) up to 20(25)
    Max thread cutting length, standard, mm 475 425
    Thread range Witworth & UNC 3/8" - 2" 5/8" - 3"
    Thread range BSP 1/4" - 1 1/2" 1/2" - 4"
    Thread range Metric M8 - M50 M16 - M100
    Spindle bore diameter, mm 62 118

Latest News