Free call: 1800 818 448

Amada Punching Machines AE Series

  • Amada Punching Machines AE Series

    Amada Punching Machines AE Series amada003

    What is the AE-NT series?

    The AE-NT series was developed as a part of our ongoing mission to provide the widest range of punching solutions. It enhances AC Series. It ensures that parts are produced faster and the cost is reduced.

    -. The AE-NT series utilizes an AC servo motor to drive the ram (eliminating the hydraulic power supply and chiller).

    -. Electrical consumption is less than one-half of comparable hydraulic machines.

    -. The AE-NT series offers significantly faster punching speeds than mechanical turrets.

    -. Space-saving design makes the most of valuable floor space.

     

    The AE-NT series turret punch press is packed with a wide variety of standard features to help produce parts faster, easier and more economically.

     

    Servo Drive

    The AE-NT series uses a single AC servo motor, along with a heavy duty precision ball screw and link assembly, which is mounted in the bridge frame to achieve hit rates of up to 400min-1 on 1" centers (depending on model and stroke length) and up to 900min-1 marking speeds. The drive mechanism features fewer components than any requirements and combined with a shear plate helps to greatly reduce the chance of damage due to overload. The drive has been tested at over 100 milion hits at full tonnage with no failures.

     

    Ecology & reduced power requirements

    Despite high hit rates, the AE-NT series requires only a 19kVA power hookup. Average total electrical consumption during punching is less than half of a typical hydraulic machine and standby power requirements are the lowest of any Amada turret punch press. Unlike a hydraulic machine, no fluid change or chiller maintenance is ever required.

     

    Highly rigid frame

    Amada is the originator of the bridge frame turret punch press. The precision-welded and stress-relieved frame is made using 40mm thick steel plate to help ensure stable, reliable production, while providing increased tooling, life and reduced punching noise over many years of day-in and day-out production.

     

    Slug protection

    The air blow tool blows air and oil mist into the die during punching to prevent slug sticking and pulling. The power vacuum etracts the slug down through the die.

    Model Ae-2510NT AE-255NT
    Press capacity (kN)
    200
    Press drive system Single AC servo drive
    Stroke length (mm) 42
    Max. Thickness (mm)

    3.2 (brush table)

    6.4 (high density brush table)

    Travel range (mm) 1270 x 2500 1270 x 1270
    Max. feed rate (m/min) X:80, Y:60
    Max. mass of material (kg) 51 (F1), 150 (F4)
    Max. hit rate (min-1, hpm)
    X-axis 350, Y-axis 280 (at 25.4mm pitch 5mm stroke)
    for punching pattern 900 (at 0.5mm pitch and 1.4mm stroke)
    for marking pattern
    X-axis 370, Y-axis 270 (at 25.4mm pitch 5mm stroke)
    for punching pattern 900 (at 0.5mm pitch and 1.4mm stroke)
    for marking pattern
    Punching accuracy (mm)
    0.1 and 0.07 (FA mode)
    Turret rotation speed (min-1, hpm) 30
    Auto-Index rotation speed (min-1,hpm) 60
    NC control AMNC/PC
    Power requirement (kVA) 19
    Max. air consumption (NI/min) 750
    Mass of machine (t) 13 12

     

Latest News

Ron Mack Machinery has been in business for over 50 years