IMAC VA Series

- Oleo dynamic working through two cylinders to guarantee a constant and smooth notching.
- A large and rigid working table with directional triple functions engraved brass scales for measuring the various types of notches.
- Squaring guides equipped with reference holes every 15°.
- An absolute rigidity of the notching group is provided by lateral columns and by a central guide.
- Internal stroke to turn the notching machine into a small shearing machine in order to get straps with a maximum length of 200 mm.
- A head configuration allowing cuts longer than the blade length.
- Blade holder sector blocking through 8 cylinders and a safety device preventing the machine from any movement when the blades are released.
- Six slots with brass scales on the working table to enable the operator to use disappearing references and to obtain complex notching.
- Electronic stroke regulator with digital reading.
- Brass measuring scales with a triple function to guarantee a quick set up of the piece and a long endurance.
- A cutting area protection sheet in Polycarbonate that gives the operator uninhibited sight of the working area while assuring a great working safety.
- Fixed alignment between the upper and the lower blades with rectified guides in order to guarantee parallel movements among the blades.
- A control board from which it’s possible to select the single stroke working or shot working in order to make it easy to personalize and optimize the time thanks also to the electronic stroke regulator which sets a limit to the stroke to a pre-arranged position according to the requirements.
- Swarf collecting box.

Downloads

Product PDF

Specifications